1.500" V-Band Clamp 304 Stainless - Quick ReleaseSKU:
Brand: Ace Race Parts
This 1.500" V-Band Clamp is intended to be used with 1.500" ID V-Band Flanges and will accept V-Band Flanges with a 2.188" OD.
Our V-Band Clamps are made from 304 stainless steel and feature a t-bolt style clamping mechanism. These clamps are made specifically for our V-Band Flanges and may not work with other brands of flanges. These clamps are only to be used with our 304 stainless flanges and are not suitable to be used with our aluminum flanges at this time. Our Quick Release V-Band Clamps, Flanges, and Assemblies utilize a slightly thinner flange profile than our Standard style V-Bands; therefore, these clamps should only be used with our flange sets from our Quick Release V-Bands.
T-Bolt; Quick Release
|Material Type||304 Stainless|
|Compatible Female Flange||22149|
|Compatible Male Flange||22133|
|Compatible V-Band Flange OD||2.188"|
Please note: Our V-Band clamps are supplied with a metal hex lock nut and a standard non-locking hex nut. The metal hex lock nut is a locking-style nut and is not intended to be used during mock-up. Attempting to thread, remove, and re-threaded the lock nut may cause damage to the "T-Bolt" section of the clamp. In some cases, excessive force can damage and/or break the "T-Bolt" section of the clamp. If you intend to use our clamps during the mock-up process please use the supplied standard finished hex nut (non-locking).
Ace Race Parts is not responsible for damage caused to our clamps due to the use of the locking-style nut during mock-up or removal.