Cart 0
5.000" V-Band Clamp 304 Stainless - Standard Clamp - Ace Race Parts

5.000" V-Band Clamp 304 Stainless - Standard Clamp

SKU:
Brand: Ace Race Parts
$ 23.79

/ each


Our V-Band Clamps are made from 304 stainless steel and feature a t-bolt style clamping mechanism. These clamps are made specifically for our V-Band Flanges and may not work with other brands of flanges. These standard T-bolt clamps are only to be used with our 304 stainless flanges and are not suitable to be used with our aluminum flanges at this time.

DETAILED SPECIFICATIONS:

Bandwidth 0.750"
Clamp Type V-Band, Standard T-Bolt
Material Type 304 Stainless
Provided Fasteners
Metal Lock Nut (QTY: 1)
Non-Locking Nut (QTY: 1)
Fastener Size (Material)
8mm-1.5 (304 Stainless)
Compatible "Male" Flange 22046
Compatible "Female" Flange 22062

Please note: Our V-Band clamps are supplied with a metal lock nut and a non-locking hex nut. The metal lock nut is a locking-style nut and is not intended to be used during mock-up. Attempting to thread, remove, and re-thread the lock nut may cause damage to the "T-Bolt" section of the clamp. In some cases, excessive force can damage and/or break the "T-Bolt" section of the clamp. If you intend to use our clamps during the mock-up process please use a non-locking hex nut.

Ace Race Parts is not responsible for damage caused to our clamps due to the use of the locking-style nut during mock-up or removal. The thread pitch of our hex nuts, lock nuts and the threaded portion of the "T-Bolt" section of the clamp is 8mm-1.5 (fine thread).

Note: The photo of the three types of nuts includes a nylon lock nut. This type of nut is not always supplied with our v-bands. The two main types of nuts supplied with each v-band assembly or clamp is the metal non-locking hex nut (finish hex nut) and the metal lock nut. If you would like a nylon lock nut to be supplied with your order please contact us.

Sale

Unavailable

Sold Out