{"title":"Transition Cones — G-Sport by GESi®","description":"\u003cp\u003eG-Sport Transition Cones adapt a core-only catalytic converter to your exhaust tubing with the same \u003cstrong\u003efactory-matched taper\u003c\/strong\u003e G-Sport uses on its weld-ready assemblies — a smooth, flow-friendly transition in stainless steel. The range covers every core body in the line: \u003cstrong\u003e4.000\" OD\u003c\/strong\u003e cores (in 2.500\" or 3.000\"), \u003cstrong\u003e4.500\"\u003c\/strong\u003e, \u003cstrong\u003e5.000\"\u003c\/strong\u003e, and the long-taper \u003cstrong\u003e6.000\"\u003c\/strong\u003e cone for the UHOX core. Cones are \u003cstrong\u003esold individually, and a core needs one on each end — order two per core\u003c\/strong\u003e unless one side mates directly to a merge or flange. None carry a sensor fitting, so add an O2 sensor bung wherever your sensor needs to sit. Each product page lists exactly which G-Sport cores that cone fits, and every core page links back to its matching cone.\u003c\/p\u003e","products":[{"product_id":"gesi-g-sport-catalytic-converter-transition-cone-2-500-inlet-outlet-x-4-000-body-94025","title":"G-Sport Transition Cone For 4.000\" OD Body Catalytic Converters - 2.500\" Inlet\/Outlet (94025)","description":"\u003cp\u003e\u003cstrong\u003eAlso available:\u003c\/strong\u003e \u003ca href=\"\/products\/gesi-g-sport-catalytic-converter-transition-cone-3-000-inlet-outlet-x-4-000-body-94030\"\u003e3.000\" x 4.000\" Body (94030)\u003c\/a\u003e | \u003ca href=\"\/products\/gesi-g-sport-catalytic-converter-transition-cone-3-000-inlet-outlet-x-4-500-body-94530\"\u003e3.000\" x 4.500\" Body (94530)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSMOOTH TRANSITIONS FOR G-SPORT CATALYTIC CORES — 2.500\" TUBING TO 4.000\" BODY\u003c\/h5\u003e\n\u003cp\u003eGESi's universal Transition Cones create a smooth, flow-friendly transition between a G-Sport catalytic core and the rest of your exhaust system. This cone adapts any \u003cstrong\u003e4.000\" OD body G-Sport core\u003c\/strong\u003e to \u003cstrong\u003e2.500\" exhaust tubing\u003c\/strong\u003e, matching the taper G-Sport uses on its factory-assembled converters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold individually — a core needs one cone on each end, so order two per core\u003c\/strong\u003e (or one, where the core mates directly to a merge or flange on the other side).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-matched taper\u003c\/strong\u003e — the same transition geometry G-Sport uses on its weld-ready converters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction\u003c\/strong\u003e to match the core and survive exhaust heat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sensor fitting\u003c\/strong\u003e — clean cone; add one of our \u003ca href=\"\/blogs\/news\/o2-sensor-bungs-aluminum-mild-steel-stainless-steel-titanium\"\u003eO2 sensor bungs\u003c\/a\u003e wherever your sensor needs to sit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeld-in installation\u003c\/strong\u003e for a permanent, leak-free joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInlet\/Outlet: 2.500\"\u003c\/li\u003e\n\u003cli\u003eFits Converter Body: 4.000\" OD\u003c\/li\u003e\n\u003cli\u003eCone Base Diameter: 3.860\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 1.750\"\u003c\/li\u003e\n\u003cli\u003eStyle: No sensor fitting\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eSold As: Individually (use two per core)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.26 lbs\u003c\/li\u003e\n\u003cli\u003eConnection: Welding Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE G-SPORT CORES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWorks with every G-Sport 4.000\" OD body catalytic core: \u003ca href=\"\/products\/gesi-g-sport-gen1-epa-compliant-catalytic-converter-core-4-000-body-x-4-000-long-300-cpsi-50000\"\u003eGen1 HO Core (50002)\u003c\/a\u003e, \u003ca href=\"\/products\/gesi-g-sport-gen2-epa-compliant-catalytic-converter-core-4-000-body-x-4-000-long-400-cpsi-85200\"\u003eGen2 HO Core (50200)\u003c\/a\u003e, and their 6-packs (\u003ca href=\"\/products\/g-sport-gesi-gen1-epa-compliant-catalytic-converter-core-6-pack-4-000-body-x-4-000-long-300-cpsi-650000\"\u003e650002\u003c\/a\u003e, \u003ca href=\"\/products\/g-sport-gen2-epa-compliant-catalytic-converter-core-6-pack-4-000-body-x-4-000-long-650200\"\u003e650200\u003c\/a\u003e). It also works as a repair or re-fabrication cone for 4.000\"-body G-Sport assemblies.\u003c\/p\u003e\n\u003cp\u003eFor the full selection guide, see \u003ca href=\"\/blogs\/news\/understanding-the-g-sport-catalytic-converter-lineup\"\u003eUnderstanding the G-Sport Catalytic Converter Lineup\u003c\/a\u003e; installation best practices are in our \u003ca href=\"\/blogs\/g-sport\/g-sport-catalytic-converter-installation-guidelines\"\u003eG-Sport Installation Guidelines\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which cone matches your core and tubing? Email us at \u003ca href=\"mailto:support@aceraceparts.com\"\u003esupport@aceraceparts.com\u003c\/a\u003e and we will point you to the right part.\u003c\/p\u003e","brand":"G-Sport","offers":[{"title":"Default Title","offer_id":39398355566655,"sku":"GSP94025","price":29.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8304\/products\/G-Sport-94025-94030-94035-HO-Transition-Cone-single.png?v=1626481791"},{"product_id":"gesi-g-sport-catalytic-converter-transition-cone-3-000-inlet-outlet-x-4-000-body-94030","title":"G-Sport Transition Cone For 4.000\" OD Body Catalytic Converters - 3.000\" Inlet\/Outlet (94030)","description":"\u003cp\u003e\u003cstrong\u003eAlso available:\u003c\/strong\u003e \u003ca href=\"\/products\/gesi-g-sport-catalytic-converter-transition-cone-2-500-inlet-outlet-x-4-000-body-94025\"\u003e2.500\" x 4.000\" Body (94025)\u003c\/a\u003e | \u003ca href=\"\/products\/gesi-g-sport-catalytic-converter-transition-cone-3-000-inlet-outlet-x-4-500-body-94530\"\u003e3.000\" x 4.500\" Body (94530)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSMOOTH TRANSITIONS FOR G-SPORT CATALYTIC CORES — 3.000\" TUBING TO 4.000\" BODY\u003c\/h5\u003e\n\u003cp\u003eGESi's universal Transition Cones create a smooth, flow-friendly transition between a G-Sport catalytic core and the rest of your exhaust system. This cone adapts any \u003cstrong\u003e4.000\" OD body G-Sport core\u003c\/strong\u003e to \u003cstrong\u003e3.000\" exhaust tubing\u003c\/strong\u003e — the most common performance size — matching the taper G-Sport uses on its factory-assembled converters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold individually — a core needs one cone on each end, so order two per core\u003c\/strong\u003e (or one, where the core mates directly to a merge or flange on the other side).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-matched taper\u003c\/strong\u003e — the same transition geometry G-Sport uses on its weld-ready converters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction\u003c\/strong\u003e to match the core and survive exhaust heat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sensor fitting\u003c\/strong\u003e — clean cone; add one of our \u003ca href=\"\/blogs\/news\/o2-sensor-bungs-aluminum-mild-steel-stainless-steel-titanium\"\u003eO2 sensor bungs\u003c\/a\u003e wherever your sensor needs to sit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeld-in installation\u003c\/strong\u003e for a permanent, leak-free joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInlet\/Outlet: 3.000\"\u003c\/li\u003e\n\u003cli\u003eFits Converter Body: 4.000\" OD\u003c\/li\u003e\n\u003cli\u003eCone Base Diameter: 3.860\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 1.750\"\u003c\/li\u003e\n\u003cli\u003eStyle: No sensor fitting\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eSold As: Individually (use two per core)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.26 lbs\u003c\/li\u003e\n\u003cli\u003eConnection: Welding Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE G-SPORT CORES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWorks with every G-Sport 4.000\" OD body catalytic core: \u003ca href=\"\/products\/gesi-g-sport-gen1-epa-compliant-catalytic-converter-core-4-000-body-x-4-000-long-300-cpsi-50000\"\u003eGen1 HO Core (50002)\u003c\/a\u003e, \u003ca href=\"\/products\/gesi-g-sport-gen2-epa-compliant-catalytic-converter-core-4-000-body-x-4-000-long-400-cpsi-85200\"\u003eGen2 HO Core (50200)\u003c\/a\u003e, and their 6-packs (\u003ca href=\"\/products\/g-sport-gesi-gen1-epa-compliant-catalytic-converter-core-6-pack-4-000-body-x-4-000-long-300-cpsi-650000\"\u003e650002\u003c\/a\u003e, \u003ca href=\"\/products\/g-sport-gen2-epa-compliant-catalytic-converter-core-6-pack-4-000-body-x-4-000-long-650200\"\u003e650200\u003c\/a\u003e). It also works as a repair or re-fabrication cone for 4.000\"-body G-Sport assemblies.\u003c\/p\u003e\n\u003cp\u003eFor the full selection guide, see \u003ca href=\"\/blogs\/news\/understanding-the-g-sport-catalytic-converter-lineup\"\u003eUnderstanding the G-Sport Catalytic Converter Lineup\u003c\/a\u003e; installation best practices are in our \u003ca href=\"\/blogs\/g-sport\/g-sport-catalytic-converter-installation-guidelines\"\u003eG-Sport Installation Guidelines\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which cone matches your core and tubing? Email us at \u003ca href=\"mailto:support@aceraceparts.com\"\u003esupport@aceraceparts.com\u003c\/a\u003e and we will point you to the right part.\u003c\/p\u003e","brand":"G-Sport","offers":[{"title":"Default Title","offer_id":39398355894335,"sku":"GSP94030","price":26.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8304\/products\/G-Sport-94025-94030-94035-HO-Transition-Cone-single_a0d8b16d-13c8-4bb8-b8a0-d77c60c28eab.png?v=1626481946"},{"product_id":"gesi-g-sport-catalytic-converter-transition-cone-3-000-inlet-outlet-x-4-500-body-94530","title":"G-Sport Transition Cone For 4.500\" OD Body Catalytic Converters - 3.000\" Inlet\/Outlet (94530)","description":"\u003cp\u003e\u003cstrong\u003eAlso available:\u003c\/strong\u003e \u003ca href=\"\/products\/gesi-g-sport-catalytic-converter-transition-cone-3-000-inlet-outlet-x-4-000-body-94030\"\u003e3.000\" x 4.000\" Body (94030)\u003c\/a\u003e | \u003ca href=\"\/products\/g-sport-gesi-transition-cone-for-5-000-od-body-catalytic-converters-3-000-inlet-outlet-95530\"\u003e3.000\" x 5.000\" Body (95530)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSMOOTH TRANSITIONS FOR G-SPORT UHO CORES — 3.000\" TUBING TO 4.500\" BODY\u003c\/h5\u003e\n\u003cp\u003eGESi's universal Transition Cones create a smooth, flow-friendly transition between a G-Sport catalytic core and the rest of your exhaust system. This cone adapts any \u003cstrong\u003e4.500\" OD body G-Sport core\u003c\/strong\u003e — the 850hp UHO tier — to \u003cstrong\u003e3.000\" exhaust tubing\u003c\/strong\u003e, matching the taper G-Sport uses on its factory-assembled converters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold individually — a core needs one cone on each end, so order two per core\u003c\/strong\u003e (or one, where the core mates directly to a merge or flange on the other side).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-matched taper\u003c\/strong\u003e — the same transition geometry G-Sport uses on its weld-ready converters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction\u003c\/strong\u003e to match the core and survive exhaust heat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sensor fitting\u003c\/strong\u003e — clean cone; add one of our \u003ca href=\"\/blogs\/news\/o2-sensor-bungs-aluminum-mild-steel-stainless-steel-titanium\"\u003eO2 sensor bungs\u003c\/a\u003e wherever your sensor needs to sit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeld-in installation\u003c\/strong\u003e for a permanent, leak-free joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInlet\/Outlet: 3.000\"\u003c\/li\u003e\n\u003cli\u003eFits Converter Body: 4.500\" OD\u003c\/li\u003e\n\u003cli\u003eCone Base Diameter: 4.360\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 1.750\"\u003c\/li\u003e\n\u003cli\u003eStyle: No sensor fitting\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eSold As: Individually (use two per core)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.36 lbs\u003c\/li\u003e\n\u003cli\u003eConnection: Welding Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE G-SPORT CORES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWorks with every G-Sport 4.500\" OD body catalytic core: \u003ca href=\"\/products\/g-sport-gesi-gen1-epa-compliant-catalytic-converter-core-4-500-body-x-4-000-long-300-cpsi-85000\"\u003eGen1 UHO Core (85002)\u003c\/a\u003e, \u003ca href=\"\/products\/gesi-g-sport-gen2-epa-compliant-catalytic-converter-core-4-500-body-x-4-000-long-400-cpsi-85200\"\u003eGen2 UHO Core (85200)\u003c\/a\u003e, and their 6-packs (\u003ca href=\"\/products\/g-sport-gen1-uho-epa-compliant-catalytic-converter-core-6-pack-4-500-body-x-4-000-long-685002\"\u003e685002\u003c\/a\u003e, \u003ca href=\"\/products\/g-sport-gen2-epa-compliant-catalytic-converter-core-6-pack-4-500-body-x-4-000-long-85200\"\u003e685200\u003c\/a\u003e). It also works as a repair or re-fabrication cone for 4.500\"-body G-Sport assemblies.\u003c\/p\u003e\n\u003cp\u003eFor the full selection guide, see \u003ca href=\"\/blogs\/news\/understanding-the-g-sport-catalytic-converter-lineup\"\u003eUnderstanding the G-Sport Catalytic Converter Lineup\u003c\/a\u003e; installation best practices are in our \u003ca href=\"\/blogs\/g-sport\/g-sport-catalytic-converter-installation-guidelines\"\u003eG-Sport Installation Guidelines\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which cone matches your core and tubing? Email us at \u003ca href=\"mailto:support@aceraceparts.com\"\u003esupport@aceraceparts.com\u003c\/a\u003e and we will point you to the right part.\u003c\/p\u003e","brand":"G-Sport","offers":[{"title":"Default Title","offer_id":39398355959871,"sku":"GSP94530","price":49.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8304\/products\/G-Sport-94025-94030-94035-HO-Transition-Cone-single_20bf59b9-493e-4a75-b3e9-86854e71aed3.png?v=1626482015"},{"product_id":"g-sport-gesi-transition-cone-for-5-000-od-body-catalytic-converters-3-000-inlet-outlet-95530","title":"G-Sport Transition Cone For 5.000\" OD Body Catalytic Converters - 3.000\" Inlet\/Outlet (95530)","description":"\u003cp\u003e\u003cstrong\u003eAlso available:\u003c\/strong\u003e \u003ca href=\"\/products\/gesi-g-sport-catalytic-converter-transition-cone-3-000-inlet-outlet-x-4-500-body-94530\"\u003e3.000\" x 4.500\" Body (94530)\u003c\/a\u003e | \u003ca href=\"\/products\/g-sport-transition-cone-for-6-000-od-body-catalytic-converters-3-000-inlet-outlet-96030\"\u003e3.000\" x 6.000\" Body (96030)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSMOOTH TRANSITIONS FOR THE G-SPORT UHO+ CORE — 3.000\" TUBING TO 5.000\" BODY\u003c\/h5\u003e\n\u003cp\u003eGESi's universal Transition Cones create a smooth, flow-friendly transition between a G-Sport catalytic core and the rest of your exhaust system. This cone adapts the \u003cstrong\u003e5.000\" OD body G-Sport core\u003c\/strong\u003e — the 1,000hp UHO+ tier — to \u003cstrong\u003e3.000\" exhaust tubing\u003c\/strong\u003e, matching the taper G-Sport uses on its factory-assembled converters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold individually — a core needs one cone on each end, so order two per core\u003c\/strong\u003e (or one, where the core mates directly to a merge or flange on the other side).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-matched taper\u003c\/strong\u003e — the same transition geometry G-Sport uses on its weld-ready converters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction\u003c\/strong\u003e to match the core and survive exhaust heat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sensor fitting\u003c\/strong\u003e — clean cone; add one of our \u003ca href=\"\/blogs\/news\/o2-sensor-bungs-aluminum-mild-steel-stainless-steel-titanium\"\u003eO2 sensor bungs\u003c\/a\u003e wherever your sensor needs to sit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeld-in installation\u003c\/strong\u003e for a permanent, leak-free joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInlet\/Outlet: 3.000\"\u003c\/li\u003e\n\u003cli\u003eFits Converter Body: 5.000\" OD\u003c\/li\u003e\n\u003cli\u003eCone Base Diameter: 4.870\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 1.750\"\u003c\/li\u003e\n\u003cli\u003eStyle: No sensor fitting\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eSold As: Individually (use two per core)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.51 lbs\u003c\/li\u003e\n\u003cli\u003eConnection: Welding Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE G-SPORT CORES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMade for the \u003ca href=\"\/products\/gesi-g-sport-uho-gen2-epa-compliant-catalytic-converter-core-400-cpsi-85500\"\u003eGen2 UHO+ Core (85500)\u003c\/a\u003e — the 5.000\" body, 1,000hp-rated core — and as a repair or re-fabrication cone for other 5.000\"-body G-Sport units.\u003c\/p\u003e\n\u003cp\u003eFor the full selection guide, see \u003ca href=\"\/blogs\/news\/understanding-the-g-sport-catalytic-converter-lineup\"\u003eUnderstanding the G-Sport Catalytic Converter Lineup\u003c\/a\u003e; installation best practices are in our \u003ca href=\"\/blogs\/g-sport\/g-sport-catalytic-converter-installation-guidelines\"\u003eG-Sport Installation Guidelines\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which cone matches your core and tubing? Email us at \u003ca href=\"mailto:support@aceraceparts.com\"\u003esupport@aceraceparts.com\u003c\/a\u003e and we will point you to the right part.\u003c\/p\u003e","brand":"G-Sport","offers":[{"title":"Default Title","offer_id":39453331980351,"sku":"GSP95530","price":49.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8304\/products\/G-Sport-94025-94030-94035-HO-Transition-Cone-single_b578addc-9809-4b60-8334-a87e27821183.png?v=1631647679"},{"product_id":"g-sport-transition-cone-for-6-000-od-body-catalytic-converters-3-000-inlet-outlet-96030","title":"G-Sport Transition Cone For 6.000\" OD Body Catalytic Converters - 3.000\" Inlet\/Outlet (96030)","description":"\u003cp\u003e\u003cstrong\u003eAlso available:\u003c\/strong\u003e \u003ca href=\"\/products\/g-sport-gesi-transition-cone-for-5-000-od-body-catalytic-converters-3-000-inlet-outlet-95530\"\u003e3.000\" x 5.000\" Body (95530)\u003c\/a\u003e | \u003ca href=\"\/products\/gesi-g-sport-catalytic-converter-transition-cone-3-000-inlet-outlet-x-4-500-body-94530\"\u003e3.000\" x 4.500\" Body (94530)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eSMOOTH TRANSITIONS FOR THE G-SPORT UHOX CORE — 3.000\" TUBING TO 6.000\" BODY\u003c\/h5\u003e\n\u003cp\u003eGESi's universal Transition Cones create a smooth, flow-friendly transition between a G-Sport catalytic core and the rest of your exhaust system. This is the \u003cstrong\u003elargest cone in the line\u003c\/strong\u003e, adapting the \u003cstrong\u003e6.000\" OD body G-Sport core\u003c\/strong\u003e — the 1,200hp UHOX tier — to \u003cstrong\u003e3.000\" exhaust tubing\u003c\/strong\u003e. Its longer 3.000\" taper keeps the transition angle shallow across the big diameter change for smooth, even flow into the substrate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold individually — a core needs one cone on each end, so order two per core\u003c\/strong\u003e (or one, where the core mates directly to a merge or flange on the other side).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-matched taper\u003c\/strong\u003e — the same transition geometry G-Sport uses on its weld-ready converters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended 3.000\" length\u003c\/strong\u003e for a shallow, flow-friendly angle across the 6.000\"-to-3.000\" step\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction\u003c\/strong\u003e; \u003cstrong\u003eno sensor fitting\u003c\/strong\u003e — add one of our \u003ca href=\"\/blogs\/news\/o2-sensor-bungs-aluminum-mild-steel-stainless-steel-titanium\"\u003eO2 sensor bungs\u003c\/a\u003e wherever your sensor needs to sit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeld-in installation\u003c\/strong\u003e for a permanent, leak-free joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInlet\/Outlet: 3.000\"\u003c\/li\u003e\n\u003cli\u003eFits Converter Body: 6.000\" OD\u003c\/li\u003e\n\u003cli\u003eCone Base Diameter: 5.860\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 3.000\"\u003c\/li\u003e\n\u003cli\u003eStyle: No sensor fitting\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eSold As: Individually (use two per core)\u003c\/li\u003e\n\u003cli\u003eWeight: 0.51 lbs\u003c\/li\u003e\n\u003cli\u003eConnection: Welding Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE G-SPORT CORES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMade for the \u003ca href=\"\/products\/gesi-g-sport-gen2-epa-compliant-catalytic-converter-core-6-000-body-x-4-000-long-400-cpsi-85600\"\u003eGen2 UHOX Core (85600)\u003c\/a\u003e — the 6.000\" body, 1,200hp-rated core favored by the Porsche GT3 crowd and hard-working diesel-adjacent builds — and as a repair or re-fabrication cone for other 6.000\"-body G-Sport units.\u003c\/p\u003e\n\u003cp\u003eFor the full selection guide, see \u003ca href=\"\/blogs\/news\/understanding-the-g-sport-catalytic-converter-lineup\"\u003eUnderstanding the G-Sport Catalytic Converter Lineup\u003c\/a\u003e; installation best practices are in our \u003ca href=\"\/blogs\/g-sport\/g-sport-catalytic-converter-installation-guidelines\"\u003eG-Sport Installation Guidelines\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNot sure which cone matches your core and tubing? Email us at \u003ca href=\"mailto:support@aceraceparts.com\"\u003esupport@aceraceparts.com\u003c\/a\u003e and we will point you to the right part.\u003c\/p\u003e","brand":"G-Sport","offers":[{"title":"Default Title","offer_id":41415075102783,"sku":"GSP96030","price":67.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8304\/products\/G-Sport-94025-94030-94035-HO-Transition-Cone-single_b578addc-9809-4b60-8334-a87e27821183.png?v=1631647679"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/8304\/collections\/G-Sport-GEN1-Advanced-Hero-UHO-Blank_5f401c2c-354e-4365-ba1b-43072ecf0b7f.png?v=1787942117","url":"https:\/\/www.aceraceparts.com\/collections\/g-sport-transition-cones.oembed","provider":"Ace Race Parts","version":"1.0","type":"link"}